1. Install the Lumion plug-in for Revit
1.1: Please follow the instructions below to download and install the plug-in for your version of Lumion and Revit:
- Download Link: Download Lumion LiveSync for Revit
Revit LT: See section 4 below.
2. Method A: LiveSync export
2.1: With Lumion LiveSync for Revit and Lumion 8.3 and newer, you can immediately set up a live, real-time visualization of your Revit 2015-2022 model. Make sure that you have selected a 'Perspective 3D View' in Revit (see also section 5.12 below) before clicking on the LiveSync button.
(If you are using Lumion 8.0 and older, please see Method B below)
3. Method B: Lumion .DAE file export
3.1: We recommend exporting the model via LiveSync rather than via .DAE format as it is faster and requires fewer resources. However, if you prefer to export your model via a file (or if you are using Lumion 8.0 and older), you can export a Lumion Collada file (.DAE) file from Revit using the Lumion LiveSync for Revit Export button in the palette. This file can be imported directly into Lumion.
3.2: Select the desired export options:
3.3: If you hold down the Shift key when clicking on the Export button, you will see more options:
- In Revit, you can mark the Base Point and Survey Point in your project. The Lumion exporter settings let you define one of those as the Insertion Point in Lumion.
- If you choose Base point as the Insertion Point, then 'project North' is taken into account.
- If you choose Survey point as the Insertion Point, then 'true North' is taken into account.
- The Surface Smoothing slider lets you define how detailed curvy surfaces should be.
- Setting it to the maximum value can have a serious impact on the time it takes to import the model as well as on performance and render speeds in Lumion.
- For that reason, we recommend setting the slider to the lowest possible value that still ensures that curvy objects look reasonably smooth.
- If ticked, all of the textures that are used by the Revit model will be placed in a folder in the same location as the .DAE file. This tickbox should remain ticked if you need to import the .DAE file on a different computer.
- This tickbox should only be ticked if you have prepared a special model for 'node' replacement in Lumion. There is more information about this process in the following article:
- Knowledge Base: How do you replace imported 'proxy' objects with Library objects?
- This tickbox is only required for legacy naming conventions and should normally never be ticked.
Skip interior details: If you select this option then these Revit Categories are not exported:
- Communication Devices
- Data Devices
- Duct Terminal
- Electrical Equipment
- Electrical Fixtures
- Fire Alarm Devices
- Furniture Systems
- Generic Model
- Lighting Devices
- Lighting Fixtures
- Mechanical Equipment
- Model Text
- Nurse Call Devices
- Plumbing Fixtures
- Security Devices
- Specialty Equipment
- Telephone Devices
Optimize railings and structural elements:
- This tickbox lets you export railings, roofing elements and structural elements with fewer details to prevent Revit from crashing. Please note that section planes in Revit are not supported when this tickbox is ticked.
Optimize IFC surfaces:
- If ticked, IFC surfaces will use far fewer materials which can help prevent very low framerates in Lumion.
Merge Linked Materials:
- Merge the same material in linked Revit models to a single material in the model for Lumion.
4. Importing models from Revit LT
4.1: Install the DWG plug-in for Lumion if you are using version 9.5 or older:
- Lumion 10.0 and newer: No plug-in installation is necessary.
- Revit LT 2018-2021 and Lumion 8.0-9.5: Please install DWGToLumionBridge2018 and export to .DWG 2018 file format.
- Revit LT 2017 and Lumion 6.5 or 7.x: Please install DWGToLumionBridge2017 and export to .DWG 2013 file format or older.
- Download Link: Download Lumion DWG plug-in
4.2: In Revit LT, click on File -> Export -> Options -> Export Setups DWG/DXF:
4.3: Click on the Layers tab and select 'Export category properties BYLAYER and overrides BYENTITY':
4.4: Click on the Colors tab and select 'Specified in view (True Color - RGB values)':
4.5: Click on File -> Export -> CAD Formats -> DWG to export the model and then import it in Lumion.
- Please note that textures are not transferred correctly from Revit LT to Lumion due to Autodesk limitations in the exported .DWG file.
- Different materials may also be combined for certain building elements, so you should assign a unique color to the material that you do not want to be merged before exporting the model.
5. Tips & Troubleshooting
5.1: Why can't you see the model after importing and placing it in your Scene?
- Make sure that your Revit model is placed near the Base Point or Survey Point depending on which Insertion Point type you have selected in the plug-in export options (see section 3.3 above) before importing it in Lumion.
5.2: Why can't you assign a Lumion material to individual surfaces?
- Lumion will always combine surfaces that use the same material in Revit. If you want to assign a Lumion material to a specific surface, you must assign a unique material to that surface in Revit before importing the model.
- If you are using Revit LT, please assign a unique color to the material that you do not want to be merged before exporting the model.
- Revit MEP. Ensure that you assign the materials by category for the piping system. If you assign a material to the system, then there is only a single material for the complete piping system and Lumion is not able to recognize individual surfaces/piping structures.
5.3: What does the Geometry Optimization setting do in older versions of the plug-in?
- Before the plugin exports an object from Revit it needs to tessellate it (divide the model into triangles). But the default built-in Revit tessellator has a problem with thin, long objects (railings, frames, etc). It generates too many triangles. If you turn on Geometry Optimization then, only for the given object categories, the exporter tries to tessellate it differently to get optimal smoothing with minimal triangles, instead of the built-in tessellator. However, occasionally there is a drawback; sometimes texture mapping coordinates are incorrect. It's better to avoid this option unless your Scene generates too large a .DAE file (after reducing it using lower Surface Smoothing/Smoothing Accuracy settings).
5.4: Can you export a Family model (.RFA file)?
- No, the Lumion exporter cannot export a single .RFA file (Family) and will result in an error ("Object reference not set to an instance of an object"). This is a technical constraint.
- To solve the problem, make sure that the .RFA model is placed in an .RVT project file.
5.5: What do you do if your Lumion Materials go missing after re-importing a model?
5.6: How do you replace imported objects with Library objects?
5.7: Why are some materials automatically converted to water and glass in Lumion?
The following Revit material surface types (as in the Appearance tab) are automatically converted to special glass or water materials in Lumion when using LiveSync (or .DAE files if you use Lumion 10 or newer) to export the model:
- Glazing -> Glass in Lumion
- SolidGlass -> Glass in Lumion
- Mirror -> Glass in Lumion
- PrismTransparent -> Glass in Lumion
- Water -> Water in Lumion
The automatic conversion only takes place when you start the LiveSync function (or when importing a .DAE file if you use Lumion 10 or newer).
5.8: How do you update a model in LiveSync when the file name or folder location of the Revit file has changed?
5.9: How do you resolve an 'Object reference is not set to an instance of an object' message?
Please follow the instructions in section 4 in the article below:
5.10: How do you connect LiveSync with BIM360 for multiple users of Lumion?
5.11: How do you link the same material for multiple Revit models?
- Knowledge Base: How do you link the same material for multiple Revit models?
5.12: How do you make sure the camera is synced between Revit and Lumion?
Please make sure that you are in a '3D View' in Revit and that the 'Projection Mode' is set to 'Perspective'.
and that LiveSync Camera Synchronization has been turned On:
or is On in the LiveSync settings -> Camera sync on start.